Cannabis flowering stage: a guide for beginners
In this article, you can find information about Cannabis flowering, week by week, with photos and pictures. The flowering stage in Cannabis plants is the period when plants grow their buds. After some weeks of vegetative growth, Cannabis plants will be able to flower when the photoperiod switches. Learn how to take care of your plant in this stage to harvest quality buds!
When does the Flowering stage begin?
Flowering stage outdoors
Growing outdoors, plants will start the flowering stage when the days grow shorter, usually when Autumn is coming.
Flowering stage indoors
For Cannabis plants to enter the flowering stage in indoor crops, the photoperiod must be switched to 12 12-hour light / 12 hours of darkness schedule.
Autoflowering strains don’t need a photoperiod change to start flowering, their vegetative stage lasts around 4 weeks and then they switch stages automatically.
How long does the flowering stage take?
The duration of the flowering stage varies among different strains.
The flowering stage in Cannabis plants usually goes from 8 to 11 weeks, depending on the strain. It’s usually divided into weeks or three stages. The flowering period for Indica labeled strains is typically around 8 weeks, but it may take up to 10 weeks. Sativa-labeled strains may take up to 10-12 weeks. Typically, hybrid strains will take up to 6-10 weeks to fully develop.
How do I know if my plant is male or female?
Here’s a quick visual guide on how to tell if your Cannabis plant is male, female, or hermaphrodite. For more information and tips on how to find out, read our full article on determining the sex of a Cannabis plant.


Basic growing requirements for flowering Cannabis plants
Lighting
Light is very important in every stage of the Cannabis plant life cycle, but in the Flowering stage is key to keep a Photoperiod: 12 hours of light / 12 hours of darkness. Do not interrupt the dark periods by opening “just for a sec” your growing environment. Light pollution may cause your plant to slow the budding process or even to revegetate (go back to the veg stage) or start producing hermaphrodite flowers.
Temperature
Cannabis plants in the flowering stage thrive in temperatures around 18° – 26°C. Temperatures below this range may negatively affect the plant, or even kill it if it’s exposed to freezing temperatures for a long period. Temperatures under 17°C may slow the plant’s growth and very low temperatures (under 2°C) may damage the plant irreversibly. On the other hand, high temperatures negatively affect the plant as well. Temperatures over 28° C may cause problems such as stunted growth, burnt leaves, excessive water evaporation, excessive dryness, etc.
Humidity
As well as keeping temperatures within those “warm” ranges, taking care of the relative humidity in the growing environment is key. Relative humidity measures how much humidity is present in the air expressed as a percentage.
Humidity must be kept ideally between 40-50% in this stage. Higher levels of humidity may cause problems such as mold and fungi. Learn more about fungal diseases reading this article: https://growithjane.com/fungi-cannabis-plants/
Nutrients for Cannabis plants in the flowering stage
The main nutrients that the Cannabis plant needs to develop are Nitrogen (N), Phosphorus (P), and Potassium (K).
When the plant starts to bloom, the concentrations of P and K must be increased progressively, while the N concentrations are lowered. That is why there are specific fertilizers for vegetative growth and flowering.
Other secondary nutrients will be necessary for the correct development of the plant. These are Magnesium (Mg), Calcium (Ca), and Sulfur (S). Finally, the micronutrients are necessary but in a minimum concentration. These are Zinc (Zn), Manganese (Mn), Iron, (Fe), Boron (B), Chlorine (Cl), Cobalt (Co), Copper (Cu), Molybdenum (Mb), and Silicon (Si).
So which is the best feeding plan or nutrient application schedule for my plant? That’s up to each grower, but bear in mind you’ll need to add these nutrients, via foliar, liquid, or solid fertilizers. Even when growing organic, usually having your plant in plain soil is just not enough for the plant to produce big fat buds.
Several brands of fertilizers offer fertilizer kits specially formulated for each stage with the necessary nutrients. Start with the dose indicated by the manufacturer or even 1/2 lower to avoid saturation and gradually increase the amounts until the desired results are achieved.
Read this article to learn more about nutrients for Cannabis plants in the flowering stage.
Watering
Water your plant regularly with clean, safe water. Certainly, using chlorine-free or filtered water leads to better results. Always avoid overwatering and watch for good drainage. How to know when to water a Cannabis plant? A good test might be to stick a finger down a few cm or an inch into the soil and if it’s dry, then you’ll know it is time to water.
Ventilation
Ventilation and airflow are key for Cannabis plants to thrive and grow healthy. In this stage, they need air not only to breathe and grow their bodies but also good ventilation to avoid the formation of mold, fungi, and rot. A good fan moving the air inside your growing environment helps a lot, but beware not to point it directly at the buds. An exhaust fan is great for increased ventilation and air movement, this also helps lowering humidity. If the exhaust fan is not enough, a dehumidifier is the best and easiest solution for keeping humidity at range.
pH levels
pH levels must remain between 5.5 and 6.5 when growing in soil. Most nutrients are available for the plant in the growing medium only between this range of pH. pH levels out of this range may cause your plant to experience nutrient deficiencies and toxicities because the nutrients may be in the soil but the plant cannot absorb them.
Container size
The size of your container is always related to the plant’s size. Are you growing in your garden soil? In pots with soil? In buckets? Hydro? The bigger the container, the more chances you have to get a bigger plant. Remember to transplant your tree before the flowering stage begins to avoid stressing the plant or accidentally damaging it.
Grow with the best cannabis growing app
Easily create plants and environments
Measure your success and share with the Community
Get professional Grower Support from seed to harvest.

Flowering stage in Cannabis plants week by week
Flowering initiation stage – week 1-3
From week 1-3 plants stretch and grow in size and height. This phase is also known as the transition phase, as plants experience drastic changes these days. Plants stretch and may double their size in this phase. The female Cannabis plant starts blooming by producing pre-flowers, their pistils look like “white hairs”.


Towards the end of the third week, the plant starts forming its bud sites in the plant nodes (where the main stem and the branches meet). Look for clusters of female preflowers.
All those places where white pistils have been growing are future bud sites. If you accidentally cut the preflowers along with the fan leaves, there’s a chance that that bud will stop growing. You may lightly defoliate your plant during this phase, but be careful not to touch or damage the forming bud sites.


Look at the color of the fan leaves and the general look of each plant to have a better idea of their health and needs. The fan leaves should be vibrant green, not too light or dark. For example, yellow and discolored leaves may indicate a deficiency, while dark and clawing leaves may indicate nutrient burn. Track these changes in the Grow with Jane app as soon as you notice them for a better chance of diagnosing your plants correctly and in time to heal them!
It’s also important to check for pests, mold, and fungi before our plants start making their buds. Most importantly, eliminating these at this point is usually easier than doing it later in the flowering stage.
Learn more about pests in cannabis plants https://growithjane.com/pest-cannabis-plants/
Learn how to get rid of pests in cannabis plants https://growithjane.com/bugs-cannabis-plant/
Mid-Flowering stage – week 4-5
From week 4-5 plants stop growing in size and start growing, fattening their buds and darkening their pistils.
- Humidity levels need to be lowered to 40-50%
- It’s best to slightly lower temperatures in flowering
- Temperatures with lights on 18-26 ° C (avoid high temperatures)



At this stage, you should continue to train your plant if you started some weeks earlier and you should be seeing some changes. In addition, if you need to tie or move your plants, remember that now they are putting all their efforts into growing buds, so any stress or damage may slow that process.
Remember to continue to move your lamp or plants so they maintain their adequate distance. Now your plants are growing at a fast rate and they need their feeding and watering schedule to be followed for optimal results.
It’s normal at this phase to see some old leaves yellowing and finally turning brown and falling. That’s because some nutrients are “mobile”, meaning that once the plant has absorbed them, they can be stored and distributed inside the plant as needed. So an old leaf may “send” nutrients to the newer ones and once the plant doesn’t need that leave anymore, it lets it die and fall. If you notice lots of leaves yellowing or any changes in color or texture in the new or old leaves, check for nutrient deficiencies or burn!
Late flowering / Ripening stage – week 6 to harvest
In the last few weeks, buds have gained the most weight. They are sticky to the touch and can be very smelly. You are very close to reaching your goal = harvesting!
- Bring down humidity levels: 45% if possible
- Increase the temperature difference (day/night)
- Temperatures with lights on 18-24 °C
- Start checking trichomes for signals or ripening to know when to harvest
- You can flush your plants 1-2 weeks before harvest
Most importantly, buds are now covered in trichomes, which are rich glandules for secreting THC and other cannabinoids. These are responsible for the stickiness in the colas. Depending on the strain and the breeding, these buds may have strong aromas, reminding of fruits, flowers, and spices for example.
In this stage of the Cannabis plant, pistils may show white, cream, and brown colors. They also start curling inwards and they get covered in trichomes. Similarly, trichomes also change colors and you should pay close attention to these changes because they are one of the best clues for knowing when is the best time for harvesting.


Flushing your plants (week 8-10)
Flushing a Cannabis plant is running a lot of water through its growing medium (soil, for example) to get rid of the excess salt and mineral nutrients. This action forces your plant to use up any amount of nutrients previously absorbed. The result will be buds with better flavor and aroma. The excess fertilizer in your Cannabis plant may result in buds that are harsh to the throat when smoked. Flushing with clean, room temperature water will help to get rid of fertilizer excess in the soil.
Two weeks before harvesting is usually a good moment to start flushing your plants and watering with water only and no fertilizers until the harvesting moment. You can water with 10%-20% more water than usual and see how your plants react, they shouldn’t look droopy and should recover soon. The excess water will slowly drain from the bottom of the pot.
A good visual sign is that, in the beginning, the water coming from the bottom of the pot will be dark and will gradually turn to a lighter color. By running this process in each plant, most of the salt buildup should flush away from the substrate.
Even though lots of fertilizer companies recommend flushing plants for two weeks before harvesting, many growers nowadays choose to avoid flushing altogether and still have good results. It’s a matter of personal choice and one must evaluate the growing conditions, the nutrient schedule, and the final results.
Harvesting Guide
Read the following article to learn exactly when to harvest your flowering plants, how to tell if they are ready by looking at trichomes and pistils, how to dry and cure your buds, and more! All are explained thoroughly, with pics and a Step-by-step harvesting guide.
Grow with the best cannabis growing app
Easily create plants and environments
Measure your success and share with the Community
Get professional Grower Support from seed to harvest.

I like vegetables.
Me too! xD Thanks for reading!!
I want to send a pic of my 1st time plant that is flowering on a few stalks,, does the flowering supposed to leave a white dust on some of leaves????
Hello Dt! When flowering, Cannabis plants produce trichomes, which look like small crystals on some leaves. If you are noticing something like dust or flour, it could be a fungal disease called Powdery Mildew. In that case, spray the leaves with a solution of water + potassium bicarbonate or baking soda (sodium bicarbonate) (5–20 grams per liter) and then clean the leaves with disposable paper towels. Some people use low-fat milk, some use neem oil. Whatever method you choose, repeat every 10 days until you eliminate the fungi. Spraying the leaves with alkaline reverse osmosis water also may work. Do not let the Mildew advance into your buds and treat your plant before it’s too late.
Powdery Mildew usually grows in rooms crowded with plants, poor airflow, high humidity levels and stagnant air. It’s very common in outdoor crops too, especially after heavy rains. Moving the plants to get rid of excess water on the leaves (after rain) and adding a fan to move the air indoors may help.
For us to see your pics, please upload them to the Grow with Jane app and send an in app message with your issue. Our Grower Support team will look at it as soon as possible.
Thanks for reading and commenting!
I was wondering what occurs if I remove the flower buds.
I was given a small plant started from seed and was already flowering. I desire a taller bushy plant so I snipped of the beginning
male flowers and repotted on its side so the main stem could begin to grow more branches, and has now tripled the amount of branches. They are all flowering as well.
Thanks for you time!
Hi Zaida! As “removing the buds” do you mean harvesting some buds and re vegging the plant? Some growers do this successfully, but Cannabis is an annual plant so maybe it’s better to harvest all at once and start off your next plant from seed or clone.
Training plants, like growing them on their side to force them to grow more branches (LST – Low-Stress Training) is a great way to maximize your crop so make sure all those branches get enough light and go for it! You also mention “male flowers”… if your plant has buds and male flowers, it’s probably a hermie! Check out this article for more info! https://growithjane.com/determining-sex-cannabis-plants-male-female-hermie/
I hope this helps, thanks for reading!
Great stuff, thanks. Does the plant need direct sunlight during the flowering stage? I’d like to move my plants to a less conspicuous location, but the amount of direct sunlight will drop. So, I know direct sunlight is key during the vegetative stage, is that equally true during the flowering stage?
Thanks
Hello Michael! Yes, Cannabis plants need direct sunlight during the flowering stage as well. They need fewer hours of direct sunlight than in the veg stage, so it might work if they receive enough. Check for stunted growth and consider adding an additional light if necessary. Thanks for reading and commenting!
Great work Alicia! Thank you for sharing. Cannabis is such a lovely plant to prune, train and develop. I love my girls almost as much as you love yours 😉
Hello Denton. Thank you so much for your kind words, also for reading and commenting! I’m very happy to hear you like the content. Cannabis is indeed a lovely plant and we all love to learn about it! Happy growing!!