Switched to ripen nutrients at 110ml per 40L water EC 1.348 PPM 670 PH 5.8

Added 10 L of water to res this dilutes EC 2 to 1.5

Emptied out about 12L water ND replaced with 40L fresh water and added another 10% more nutrients 54ml grow and 108ml bloom EC 2.088 PPM 1045 PH 5.8 Thats 1.35ml/L Grow and 2.7ml/L Bloom

Removed balance of water and replaced with fresh 40L added 10% more nutrients that takes us up to 49,5ml Grow and 99ml Bloom. Added 6ml of ph up to get it to 5.8ph 1.899 EC 951 PPM 5.8 PH Note: tap water comes out at: 0.988 EC 495 PPM 7.31 PH

Drained balance of nutrients (about 5L) filled with 40L water and added 45ml grow and 90ml bloom ph up to 5.77ph EC 1.747 PPM 874 PH 5.82

Reservoir level had hit just below the pump line, so had to drain the remaining liquid and replace with 40 L of fresh water. I ph'd water to around 6.2 ph but after adding 45ml grow and 90ml bloom it was around d 5.4 ph so brought it back up to 5.77 ph. PH 5.8 PPM 931 EC 1.861

Mixed 4ml Spinosad and 4ml Jadam wetting agent in 2L water. Sprayed all plants indoors and outdoors

Removed old nutrient mix from res added 30L water and ph to about 6ph then added 45ml Grow and 30ml Bloom which is half of the pre flower nutrients. Hope this is not going to burn them Ph 5.8 Ppm 617